mobilethreatnet.com


Home > How To > How To Install A Second Sata Hard Drive

How To Install A Second Sata Hard Drive

Contents

Please follow the appropriate step-by-step instructions for your installation below. But yes, this is quite easy. Good luck. For setup or other questions beyond physical installation of your Western Digital hard drive, please contact your Linux/Unix vendor. this contact form

I thought it was VLC. I tried different configurations with the old drive but the only way it would recognize the 80 gig drive was when I plugged it into a USB dongle and mounted it Your Windows XP will overwrite the bootloader though, so having installed Windows XP, you'll then need to re-install the 7 bootloader by using EasyBCD tool from here: http://neosmart.net/dl.php?id=1 Reply Aibek February bios will recognize my 2nd hard drive but I am not able to access it through my compluter. http://www.sevenforums.com/hardware-devices/227892-win-7-new-install-secondary-sata-hdd-does-not-auto-mount.html

How To Install A Second Sata Hard Drive

Primary (C:) drive installation during Windows 7 setup: Make sure your drive is detected by your controller or in BIOS during bootup. Ask ! If it does not verify the connections are secure. However, I really don't understand why, because the power supply in the computer (bought in 2010) is rated at 500W/450W (peak/max) and this second HDD is the only extra component I've

  1. I presume that this is due to XP If it is, MS deserve a k*ck up the backside!!!
  2. But at least this improvement removes a defective HDD off the list of possible culprits.Two things I still don't understand:1) I'm adding the information about the power supply as requested at
  3. If the drive still is not detected after testing the cables, contact your controller card manufactuer to see if there is an update available.
  4. sofaMonsterApr 29, 2013, 6:28 PM Hi!Have you tried turning in on and off?
  5. YOU CALL THAT A TIP?
  6. The Windows 2000 Operating System has all the necessary tools to properly install a Serial ATA (SATA) hard drive or EIDE hard drive.

andyscreationsJun 14, 2014, 8:14 PM I had the same problem and found the SOLUTION.... For assistance with installing Windows please contact Microsoft Support. Can anyone help please?? How To Connect Two Hard Disk In One Pc I will test with another seagate disk when i have the money.

Special handling is required to protect hard drives from damage. How To Install A Second Hard Drive Windows 10 See more Second Hard Drive not recognized I can't detect dual hard drive in my computer My laptop is not taking second drive Second hard drive not recognized Internal second hard Worked like new. Adding an additional hard drive to a Windows Vista installation: Make sure your hard drive is detected by your Serial ATA or EIDE controller.

In the bottom window, you will see a representation of the drives in the system starting with the boot drive (drive 0). How To Install A New Hard Drive Windows 7 thanks I really didnt want to have to mess around with dos and fdisk Report NickNYC 15Posts Saturday February 14, 2009Registration date February 17, 2009 Last seen › Maniac1914 - Feb Cloning vs. During the installation process, you will be given the option to create partitions.

How To Install A Second Hard Drive Windows 10

At first, no luck. http://support.wdc.com/knowledgebase/answer.aspx?ID=981 One day when I turned my computer on, it just wouldn't boot with my HDD attached but it boots with my SSD attached alone. How To Install A Second Sata Hard Drive A CD writer and a blank CD or a thumb drive or a USB hard disk Your Windows 7 install disc if you already tried the system repair option, or the How To Connect Two Sata Hard Disk In One Pc That was probably the issue as my 2TB is power saver.

Plug your old hard drive into that IDE and power cable, making sure you set the jumper correctly. http://mobilethreatnet.com/how-to/how-to-wipe-hard-drive.html Continue steps 3 and 4 until the desired amount of partitions is obtained. Report Tina› Same problem - Nov 23, 2008 at 09:37 AM I am having the same problem. If there is space left over and you would like to create another partition select Unpartitioned Space again and press the C button on your keyboard. How To Install A Second Hard Drive Windows 7

Beneath it, we have my new 50 GB drive, shown in black because it is currently all free space. If it does not verify the connections are secure. Not the answer you're looking for? navigate here I have the same issue with my computer except that it has been running fine all these while up until I reformatted my computer a couple of weeks ago.

With SATA, all you need is a free SATA port on the motherboard, a spare bay in which to mount your second hard drive, and a SATA cable to connect the How To Format A New Hard Drive Adding an additional hard drive to a Windows XP installation: Make sure your hard drive is detected by your Serial ATA or EIDE controller. For additional information on this limitation, please contact Microsoft Knowledge Base Article 184006.

I don't know if this still is a requirement, but you could try it.

Finally highlight this partition and press the ENTER button on your keyboard to begin installing Windows XP. With the computer at Idle (on but not doing much) not the +5 and +12V.+5 should be 4.75->5.25 V+12 V should be 11.4V->12.6V (personally I ditch a PSU if ir drops I got mine with attached 3 USB3.0 slots. New Hard Drive Not Showing Up Note: If your controller supports RAID, you may need to define your drive in a RAID Array before Windows will see the drive, even if the motherboard or system drivers are

to recognize the 80 gig drive. If you are experiencing any issues during Windows installation, disable UDMA mode in the system BIOS. Also it is show in the disk management which cannot initialize or partition nor NEW simple volume as shown above or anything . http://mobilethreatnet.com/how-to/how-to-install-software-on-a-laptop-without-cd-drive.html If not, your drive is corrupted and cannot be repaired.

But I cannot get my second Western Digitial EIDE Hard Drive recognized. Highlight the Unpartitioned Space and press the C button. Note: If you are formatting using the FAT32 file system, partitions cannot be larger than 32GB. aeternum91Feb 15, 2014, 5:31 AM I swapped the SATA cables around and even tested them with both SATA 2 and 3.

Family photos are back! Boot your system up, you should be able to then go to my computer, and see your old hard drive. Enter the desired partition size. Start Windows Vista and allow the Operating System to boot to the desktop.

What is the cartesian product of cartesian products?