Home > Hard Drive > Hard Drive Preventing Computer From Turning On

Hard Drive Preventing Computer From Turning On


Preview post Submit post Cancel post You are reporting the following post: How to make a hard drive bootable? Win 7 won't care about it's old security settings. If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Being as she has never used it, I borrowed the drive and installed it in my computer as a slave drive on the same cable as my master hard drive and

Boot into BIOS Setup again, check that those units show. My main concern here is to save the files on the hard drive and since the hard drive itself has no problems other then the corrupt XP no worries about a Quote: In Windows Vista, Windows Server 2008, and later releases, NTLDR has been replaced. If the GUI program believes the disk is in use when you request the scan it will probably ask to schedule it at next boot before logon.

Hard Drive Preventing Computer From Turning On

If it does, maybe the caddy unit is faulty. Results 1 to 4 of 4 Thread: Windows XP repair on slave drive Thread Tools Show Printable Version Email this Page… Subscribe to this Thread… 03-19-2005,08:06 PM #1 rustedhalo View Profile Then you can repartition and format in windows.

For example Microsoft does not offer booting Windows from USB today. This probably won't boot properly.(b) Shut down and reconnect the HDD and Optical units. Although it can be done, getting them to work on the slave may mean you have to reinstall ALL the OSes on the first two disks if you need to reinstall Related Resources solved Vista Home Premium Fat32 was boot drive.

Although the new WD SATA HDD may have a set of pins and a jumper, you should NOT change the jumper. Hdd Prevents Boot Reply With Quote 03-20-2005,06:25 AM #4 Paul Komski View Profile View Forum Posts View Blog Entries Visit Homepage View Articles Chicken-head-eating GeekModerator Join Date Oct 2001 Location N of the S If I disconnect the slave and set the jumper on the windows 7 drive to Master no slave it boots and runs just fine. 1. This is particularly noticeable when you plug a bad removable drive in while running an OS; the system becomes unresponsive, even to the point of the mouse cursor freezing until the

When you run Cable select are you sure you are setting the jumpers on both drives? As a result, all the operating systems have to come in a certain order, on certain disks. If so, what messages do you get before it freezes? Del pagefile.sys to free up space.

Hdd Prevents Boot

The problem is when I right click on the slave drive and try to copy to primary drive, it copies a few files and then stops; I guess there are files Vista, has file security. Hard Drive Preventing Computer From Turning On Kozierok. Hard Drive Preventing Computer From Booting My computer rebooted.

Oddly, my old (slave) hard drive was not in there, but it did recognize the new empty Master drive. The caddy offers a PATA connection for the laptop and a SATA connection for the new HDD. And as a bonus question, that drive has a rescue "drive" partitioned into it for an emergency back up, which would be of no use on another computer, so can that For I shall not move. Computer Won't Power On With Hard Drive Plugged In

Set jumpers on the two units as above. If i have the drive plugged in, its stuck on the splash screen. Does it get part way through the POST process of initial messages and then freeze? have a peek here It was designed to be able to boot from ANY primary partition on ANY drive that you can set active and get your motherboard to boot from, so obviously it will

I am puzzled because you say that, with the caddy and HDD connected, your laptop just seems dead. Live CDs work just fine but when i install to the hdd it doesn't want to boot from it. I'm using a boot loader called XOSL (google that and it's page comes out near or at the top).

Click here it's easy and free.

  • Bring the hard drive from my pc at home, set it on a book, and plug it in.
  • The difference is that the OS will usually give higher IRQ priority to the primary chanel.You should check that your HDD is jumpered in accordance to where you are connecting it
  • After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore.
  • Disabling the master channel from the bios is something I would not have thought of so thanks for that one.
  • Can someone please advise on how to boot from the slave drive or do I have to switch the HD around?
  • Boot into BIOS Setup again, check that those units show.
  • Before posting on our computer help forum, you must register.
  • Make sure you run the utility drive that comes with you new had drive.
  • Yes, my password is: Forgot your password?
  • Boot into BIOS Setup and go to Boot Priority Sequence.

Main Sections Technology News Reviews Features Product Finder Downloads Drivers Community TechSpot Forums Today's Posts Ask a Question News & Comments Useful Resources Best of the Best Must Reads Trending Now is a lot of work. If it does, then you have found that the two Brands of Drive are not compatible and you will not be able to use them on the same IDE channel. -----------------------This That's handled by the boot loader on the hard drive.

hey. Is that what you are talking about? And if you just have the original Master Drive hooked up alone it still boots, correct? --------------Yes Then temporarily copy an OS (anything, even DOS from a boot CD using the then- Startup Repair 6 reboot when finished .

My Win 7 drive refused to boot, refused to repair and refused to restore. solved I know this is bad but how bad is it ??? Are you referring to Error Checking? When I got home a week ago, my desktop (pc) computer was off, which was a little strange since it had been in the process of burning a cd when I

Discussions cover Windows installation, driver problems, crashes, upgrading, service packs, and other Windows 7-related questions.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion How to make a hard drive bootable? Check BIOS Setup for Boot Priority Sequence. In Gsmartcontrol, the drive shows a lot of prefailure or old age (well, all flags are one or the other) related flags. This would keep all my files intact but I'm unshure if this will fix my problem with the error messages when trying to access files.

Ask a Question See Latest Posts TechSpot Forums are dedicated to computer enthusiasts and power users. I suggest optical unit first, then HDD. Flag Permalink Reply This was helpful (0) Collapse - Another life saved by imlass / May 13, 2014 12:01 AM PDT In reply to: Create a system partition on your new All you have to do is leave vista on the old drive.